These Simple DIY Repair Tips Will Increase Your Macbook’s Longevity

Posted on

Parts That Frequently Get Damaged

Do you have MacBook computers? Today, the fans of MacBook computers are quite high. Nevertheless, like other PCs, they can damage because of the software and hardware. When you use this computer, it is important to do the simple repairs to save your money and to avoid hiring professionals.
Commonly, the damages happen to the screen, the hinges, the keyboard, the charging system, the logic board, and the unibody. These parts are possible to get broken. Other than that, spillage can affect your computer. If the damage is too much, the professional replacement services are recommended. On the other hands, you must be able to open up the computer and fix the minor repair.
The most common damages occur to the screens, the keyboard, the hinges, the logic board, the charging system, and the unibody. These parts could get broken, or they could be affected by spillage that gets into the computer. Professional replacements services of these parts may be recommended if they suffer too much damage. Otherwise, you should be able to open up your computer and conduct minor repairs.
Here are some common repairs to take:

Full Corrosion Cleaning

This procedure means you have to clean out your computer inside and outside. It is important to clean dust, past spillages, and mold that are sticky. To do so, you will need a cleaning spirit and wipe the surface of the motherboard. After that, vacuum the open ports, including the spaces in the machines carefully. A full corrosion cleaning is important to do per two to three months to remove dust and other infestations. By doing this way, you will improve its longevity.

Accidental And Liquid Damage Repair

Liquid damage repair is the most recurring issue as far as computer damage is concerned. The part most affected by this is the computer keyboard. A spill of more than a few drops of any liquid on your Mac may destroy the functionality of certain electronic components.
In case you suffer an accidental spill, shut down your Mac to prevent frying out microchips through short-circuiting. Then strip it down and dry it out first as a first aid measure. Go ahead to inspect for further damage and unscrew and lay out the components affected by the spillage. If you compute suffers excessive spillage, you should forward it to laptop doctors in Mac repair stores.

Fan Repair: Dusting And Lubricating

The Mac’s fan is first dusted and vacuumed as standard procedure. First, remove all the debris stuck in between its blades so that it can run smoothly and noise-free. Add a special computer lubricant to it to ensure that it does not grind small bits of plastic around its rotating axle. Then screw the fan back, close up the computer and check that it is running smoothly.
This issue might be caused by old software that cannot support the quality graphics display needs of your computer. Repair your flickering or stained screen through the following these steps;
Step 1: Run a software update by checking for and initiating pending updates at the upper left side of the screen.
Step 2: Turn your MacBook off while still connected to the power cord. This is necessary for the updates to pick up on your computer’s system when you turn it on.
Step 3: Perform an internal hardware reset to configure the updates. Press Shift+Control+Option keys on the keyboard and the power button simultaneously and hold them all for about 5 seconds.
Step 4: Finally press the command+P+R keys as you turn on the power on your computer. You should hear the Mac OS startup sound twice before you let go of the keys. This should signal that everything is now ready. Check to see if the staining or flickering has gone away.

Upgrades

Mac repairs upgrades are usually done to the operating system and the existing software. Install newer versions of your old software to enable your computer to perform optimally. These versions and their descriptions are accessible from the Apple store. Other common upgrades include expanding the size of the RAM and the hard disk or replacing them to boost your computer’s processing speed. You could read up on how to perform such upgrades and check their video tutorials on the internet.

Data Recovery

Do not discard your machine even if it is jumbled up in one ball. You obviously have files, documents, and photos that are important to you and the people around you. Open up and extract the storage components of your computer such as the hard drive and the RAM. Take them to a data recovery store and salvage every bit of data from them. The recovered information will be stored for you in thumb drives and memory cards.

Leave a Reply

Your email address will not be published. Required fields are marked *